Using several handsets

Using several handsets

Registering handsets

You can register up to six handsets to your base station.

You can register your Gigaset S45 handset on up to four base stations.

Please note:

–If there are several handsets registered to your base station, then you can use one to make a call via the Internet and the other to make a call via the Internet or the fixed net- work at the same time. A maximum of two internal connections can also be made.

–As a rule, all calls from a registered GAP handset are dialled via the connection types (fixed network or VoIP, see page 67) that have been set up as Default Line. If you want to establish a connection via the other connection type, enter a "*" (star) after the phone number. Example: 049891234567*.

–After registration, all the phone numbers for the phone will be assigned to the hand- set as receiving numbers. It will use the fixed network number and the first VoIP number as sending numbers. For how to change the assignments, see page 85.

Registering another Gigaset S45 handset on the Gigaset SP450 IP

Before you can use your handset, you must register it to a base station.

You must initiate handset registration on the handset and on the base station.

If the handset was registered successfully, the display will show the internal name for the handset, e.g. Int 1. If it does not, repeat the procedure.

On the handset

v ¢Ð ¢

¢Register H/Set

~Enter the system PIN of the

base station (the default is

0000) and press §OK§.Settings Handset

The display shows e.g. Reg- str.Procedure and Base 2 flash.

On the base station

¤Within 60 secs. press and hold the reg- istration/paging key on the base station (page 1) (min. 1 sec.).

The handset is assigned the lowest unassigned internal number (1–6). If several handsets are registered to the base sta- tion, the internal number is shown in the display after registration, e.g. INT 2. This means that the handset has been assigned the internal number 2.

Please note:

If six handsets are already registered to the base station, there are two options:

–The handset with the internal number 6 is in idle status: the handset you wish to reg- ister is assigned the number 6. The handset that was previously number 6 is de-regis- tered.

–The handset with the internal number 6 is being used: the handset you wish to regis- ter cannot be registered.

Registering other handsets on the Gigaset SP450 IP

You can register other Gigaset handsets and handsets for other devices with GAP functionality as follows.

On the handset

¤Start to register the handset as described in its user guide.

On the base station

¤Press and hold the registration/paging key on the base station (page 1) (min. 1 sec.).

Please note:

You can also make changes on the base station with a Gigaset C45 handset.

56