Enter a number for the length of the pause (1 = 1 sec.;
2 = 2 secs.; 3 = 3 secs.;
4 = 6 secs.) and press §OK§. Press and hold (idle status).

Operating the base station on the PABX

The following settings are only necessary when your PABX requires them; see the PABX user guide. The settings only concern fixed network connections.

You cannot send or receive SMS messages on PABXs that do not support Calling Line Identification.

Changing the dialling mode

You can set the dialling mode.

v ¢Ð ¢

¢Fixed Line ¢Dialling ModeSettings Telephony

Tone / Pulse½

Select and press §OK§ ( = on).

aPress and hold (idle status).

Setting the flashing time

You can set the flashing time.

v ¢Ð ¢

 

Settings

Telephony

q

¢Fixed Line ¢Recall

 

Select flashing time and press

 

§OK§.

 

The current language is indicated by ½.

a

Press and hold (idle status).

Operating the base station on the PABX

Setting pauses

Changing pause after line seizure

You can set the length of the pause inserted between pressing the talk key

c and sending the phone number. v 55 O1L

~ Enter a number for the length of the pause (1 = 1 sec.;

2 = 3 secs.; 3 = 7 secs.) and press §OK§.

a Press and hold (idle status).

Changing the pause after the recall key

You can change the length of the pause if your PABX requires this (refer to the user

guide for your PABX).

v 55 O11

~

a

Switching temporarily to tone dialling (DTMF)

If your PABX still operates with dial pulsing (DP), but you need touch tone dialling (DTMF) for a connection (e.g. to listen to the network mailbox) you must switch to touch tone dialling for the call.

Precondition: You are currently conducting an external call via the fixed network or you have dialled an external fixed network number or an external call is sig- nalled.

§Options§ Open menu.

Tone Dialing

Select and press §OK§.

Touch tone dialling is now activated for this call only.

71