uThe server address for the VoIP server has not yet been entered, or has been entered incorrectly.
¤Start the Web configurator.
¤Open Settings ¢Telephony ¢Connections Web page.¤Edit the server address where neces- sary
Please note:
If port forwarding is activated on your router for the ports that have been registered as the SIP port (Standard 5060) and the RTP port (Standard 5004), it makes sense to deactivate DHCP and assign the phone a static IP address (otherwise you may not be able to hear the other party during VoIP calls):
– Via the handset menu: | |
v£Ð Settings £Base £Local Network | |
Or |
|
– Via the Web configurator: | |
¥ | Open Settings £IP Configuration |
¥ | Web page. |
Select IP address type. | |
Please note that the IP address and subnet mask depend on the router's address block.
You must also enter the standard gateway and DNS server. The IP address for the router is generally entered here.
First steps
Belt clip and headset
By using a belt clip and headset (optional) you can easily make your handset a constant companion both inside the building and in its immediate vicinity.
Attaching the belt clip
There are notches for attaching the belt clip on the side of the handset at the same height as the display.
¤Press the belt clip onto the back of the handset so that the protrusions on the belt clip engage with the notches.
Connection socket for headset
You can use headsets with jack connec- tors. The following models have been tested and are therefore recommended: HAMA Plantronics M40, MX100 and MX150.
The transmission quality of other models cannot be guaranteed.
15