Web configurator

Web configurator

The Web configurator is the Web interface for your handset. It allows you to make the settings for your phone's base station via your PC's Web browser.

Please note:

Depending on your VoIP provider, it is possible that you will be unable to change individual settings in the Web configurator.

Configuring the phone via your PC

Preconditions:

uA standard Web browser is installed on the PC, e.g. Internet Explorer version 6.0 or higher, or Firefox version 1.0.4 or higher.

uThe phone and PC are connected with each other via a router.

Please note:

–The phone is not blocked while you make your settings in the Web configurator. You can also use your phone to make calls or change base station or handset settings on your handset at the same time.

–While you are connected to the Web config- urator, it is blocked to other users. It cannot be accessed by more than one user at any time.

With the Web configurator on your phone you have the following options:

uConfigure your phone access to the local network (IP address, gateway to the Internet).

uConfigure your phone for VoIP.

uDefine the data server for firmware updates and load new firmware onto the phone if necessary.

uCopy contacts from the Outlook address book on your PC into the hand- set directories or back up your hand- set's directories on your PC.

uObtain information about your phone's status (firmware version, MAC address etc.).

Connecting PC with

Web configurator

¤Launch the Web browser on your PC.

Precondition: The settings of an avail- able firewall on the PC allow the PC and telephone to communicate with each other.

¤Enter the phone's IP address into the address field of the Web browser, e.g. http://192.168.2.2.

Your phone's IP address can change if you have activated dynamic IP address assignment (page 75).

You can check the phone's current IP address on the handset (page 70).

¤ Press the return key.

A connection is established to the phone's Web configurator.

Registering, setting the Web configurator language

Once you have successfully established the connection, the Web page Login will be displayed in the Web browser.

You can select the language you want the menus and Web configurator dialogs to be displayed in. The language that is currently selected is displayed in the top field of the Web page.

¤If necessary, click on to open the list of available languages.

¤Select the language.

¤In the bottom field of the Web page, enter your phone's system PIN (default setting: 0000) to access the Web con- figurator functions.

¤Click on OK.

72