Press the display key.
Select the handset to be de- registered.
Press the display key.
Open list of internal users. The handset you are currently using is indicated by < .

De-registering handsets

You can de-register any registered handset

from any registered Gigaset S45 handset. u

q

§Options§

De-reg. H/Set No.

Select and press §OK§.

~Enter the base station system PIN (default setting: 0000).

§Yes§

Press the display key to con-

a

firm the prompt.

Press and hold (idle status).

The handset is de-registered immediately, even if it is not in idle status.

Locating a handset ("paging")

You can locate your handset using the base station.

¤Press the registration/paging key on the base station (page 1) briefly.

¤All handsets will ring at the same time ("paging"), even if ringer tones are switched off.

Ending paging

¤Press the registration/paging key on the base station (page 1) briefly.

Or

¤Press talk key c on a handset.

Changing the base station

If your handset is registered to more than one base station, you can set it to a particular base station or to the base station

that has the best reception (Best Base).

v ¢Ð ¢

¢ Settings HandsetSelect Base

Using several handsets

sSelect one of the registered base stations or Best Base and press §OK§.

Changing a handset's internal number

A handset is automatically assigned the lowest free number on registration. In the list of internal subscribers, the handset is sorted according to its internal number.

You can change the internal number of all registered handsets (1–6). Numbers 1–6 can only be assigned once each.

uOpen list of handsets. Your own handset is indicated by <.

§Options§

Edit H/Set No.

 

Select and press §OK§. The list of

 

handsets and their internal

 

numbers will be displayed.

 

The internal number for the

q

first handset flashes.

Select handset.

~

Enter the new internal number

 

(1–6). The handset's old

q~

number is overwritten.

If necessary, select further

 

handsets and change num-

 

bers.

After all the changes are completed:

§Save§ Press the display key to save the input.

a Press and hold (idle status).

You will hear the error tone if an internal number has been allocated twice.

¤Repeat the procedure with a free number.

57