q

Select country (press the con-

 

trol key up/down) and press

 

§OK§. The VoIP providers availa-

 

ble for your VoIP profile will be

q

displayed.

Select your VoIP provider and

 

press §OK§.

The necessary general access data for your VoIP provider will be downloaded and saved on the phone.

If the data for your VoIP provider is not available for download, press the display key twice. You can then carry out the following steps with the connection assistant.

You must then make the settings needed for the VoIP provider using the Web configurator (page 78). Your VoIP provider will supply you with this data.

Entering user data for your first VoIP account

Enter the VoIP user data for the first VoIP account. Your VoIP provider will supply you with this data.

You can use the Web configurator at a later stage to enter five further VoIP accounts (VoIP phone numbers) (page 77). Your phone (together with your fixed network number) can then be reached on up to seven different phone numbers. You can assign the phone numbers to the individual handsets that are registered with the base station as sending and receiving numbers (page 85).

Username:

Enter the user name and press §Save§ if this is required by your provider.

Authent. Name:

Enter the registration name and press §Save§.

Authent. Password:

Enter password and press

§Save§.

First steps

Please note:

Please note when making these entries that the VoIP user data is case sensitive. When you enter text, the first letter is capitalised by default. If necessary, press and hold the # key to switch between upper and lower case and numbers.

Entering your name in the Gigaset.net directory

With Gigaset.net you can call other Gigaset.net users directly over the Internet free of charge, without setting up an account with a VoIP provider and without making any further settings. You can find Gigaset.net subscribers by carrying out a name search in the Gigaset.net(page 25) directory.

The following appears in the handset's dis- play:

Connection Assist.

Start assistant

for Gigaset.net?

NoYes

§Yes§

Press the display key.

Enter your Gigaset.net name:

Enter the name that you would like to be listed under in the Gigaset.net directory and press §OK§. The name may contain up to 25 characters.

A connection to the Gigaset.net server is established.

If there is already an entry under this name, you receive a message to this effect and you will be asked to enter a name again.

If an entry in the Gigaset.net directory is successful, the message "Your user name is

successfully added to Gigaset.net!" is dis-

played briefly.

13