Glossary

Multipoint Interface (MPI)

The multipoint interface is the programming device interface in SIMATIC S7. It enables the simultaneous operation of a number of nodes (programming devices, text display operator interfaces, and operator panels) from one or more CPUs. Each node is identified by an address (MPI address).

MPI Address

Multipoint Interface (MPI)

N

Nesting Depth

A block can be called from another block by means of block calls. The nesting depth is the number of simultaneously called logic blocks.

Network

In communications, a network is the connection between two or more S7-400 CPUs and other terminals such as a programming device, via a connecting cable. Data are exchanged over the network between the connected stations.

Node Number

The node number represents the accessing address of a CPU or programming device or of another intelligent I/O module when they communicate with each other via a network. The node number is assigned by the CPU or programming device using the STEP 7 software.

Non-Isolated

In the case of non-isolated I/O modules, the reference potentials of the control and load circuits are electrically connected to each other.

Automation System S7-400

Hardware and Installation

Glossary-9

A5E00850741-01

 

Page 217
Image 217
Siemens S7-400 installation manual MPI Address, Nesting Depth, Network, Node Number, Non-Isolated