Siemens S7-400 Labels, shows details for fitting a label in the front connector

Wiring the S7-400

Figure 4-19 shows details for fitting a label in the front connector.

Label with blank

Cutout in front connector

Figure 4-19 Fitting a Label in the Front Connector

Labels

•Print labels are prerequisite for professional, convenient labeling of your SIMATIC S7-400 signal modules, including FMs modules.

•The perforated labeling strips are available on DIN A4 sheets and can be easily separated without the use of a tool. This makes them easy to use and ensures a clean cut.

•The single-color labels are tear-proof and dirt-resistant. They are available in petrol, light beige, red, and yellow.

•SIMATIC S7-400 I/O modules can be easily labeled application-specifically by machine using a standard laser printer in one of the following two ways:

--Use the print templates you can download free of charge from the Internet

--Use the “S7-SmartLabel” add-on tool for SIMATIC STEP 7

4-30	Automation System S7-400	Hardware and Installation
		A5E00850741-01