Cleaning the camera windows and reflective tape
TheDViT technologyin your interactive flat panel uses fourc amerasin the corners of the frame and
thereflective material between the screenand the bezels. Excess ive dust buildupon the camera
windows orreflective t apecan impair touch performance.
Theseareas should beinspected annually for dust ands houldbe cleanedif any obviousdust buildup
hasocc urred.
CA U T I O N
lDo not use compressedair to clean the camera windows orborders.
lDo not use water, chemicals or cleaningagents.
gTo clean thecamera windows and reflectivetape
1. With a clean lint-free cloth, gently wipe the cameraw indows in the top cornersand the
reflective tapealong the top of your interactive flat panelsc reenusing the cloth.
2. Gently wipe the reflective tape alongthe sides of y ourinteractive flat panel screen.
3. Gently wipe the camera windows in the bottomc ornersand the reflective strip across the
bottomof y ourinteractive flat panel screen.
Maintaining ventilation
Yourinteractive flat panel requiresventilation to enablet hec oolingfans to function. Dust buildupin
thev entilationholes compromisescooling andleads to productfailure.
CA U T I O N
Avoid setting upor using your interactive flat panel in anarea with excessiv e levels of dust,
humidityor smoke.
lCleanaccess iblev entilationholes monthly with a dry cloth.
lUse a vacuum cleanerwith a narrow hose endf itting to clear the back ventilationholes
annually.You might have to remove theinteractive flat panelfrom your wall. For more
informationon removingyour interactive flat panel see Removingy ourinteractive flat panel on
thenext page.
CH A P T E R 7
Maintainingyour interactive flat panel
57