SMC Networks SMC7816M, SMC7816VSW P, S, 4-25

C ONSOLE P ORT S ETTINGS
4-25
device connected to the serial port. (Range: 9600, 19200, 38400, 57600,
or 115200 baud, Auto; Default:Auto)
•Stop Bits – Sets the number of the stop bits transmitted per byte.
(Range:1-2;Default: 1 stop bit)
•Password2 – Specifies a password for the line connection. When a
connection is started on a line with password protection, th e system
prompts for the password. If you enter the correct password, the system
shows a prompt. (Default: No password)
•Login2 – Enables password checking at login. You can select
authentication by a single global password as config ured for the
Password parameter, or by passwords set up for specific user-name
accounts. (Default: Local)
Web – Click System, Line, Console. Specify the console port connection
parameters as required, then click Ap ply.
Figure 4-13 Configuring the Console Port
2. CLI only.