SMC Networks SMC7816M, SMC7816VSW A, 22-41, dot1x timeout tx-period, show dot1x

802.1X P ORT A UTHENTICATION
22-41
dot1x timeout tx-period
This command sets the time that an interface on the switch waits during an
authentication session before re-transmitting an EAP packet. Use the no
form to reset to the default value.
Syntax
dot1x timeout tx-period seconds
no dot1x timeout tx-period
seconds - The number of seconds. (Range: 1-65535)
Default
30 seconds
Command Mode
Interface Configuration
Example
show dot1x
This command shows general port authentication related settings on the
switch or a specific interface.
Syntax
show dot1x [statistics] [interface interface]
•statistics - Displays dot1x status for each port.
•interface
•ethernet unit/port
-unit - Stack unit. (Range: 1)
-port - Port number. (Range: 1-19)
Command Mode
Privileged Exec
Console(config)#interface eth 1/2
Console(config-if)#dot1x timeout tx-period 300
Console(config-if)#