S
YSTEM

S

TATUS

C

OMMANDS

20-3

System Status Commands

This section describes commands used to display system information.

show startup-config

This command displays the configuration file stored in non-volatile

memory that is used to start up the system.

Command Mode

Privileged Exec

Command Usage

Use this command in conjunction with the show running-config

command to compare the information in running memory to the

information stored in non-volatile memory.

Table 20-3 System Status Commands
Command Function Mode Page
show
startup-config
Displays the contents of the configuration file
(stored in flash memory) that is used to start
up the system
PE 20-3
show
running-config
Displays the configuration data currently in
use
PE 20-6
show system Displays system information NE,
PE
20-8
show users Shows all active console and Telnet sessions,
including user name, idle time, and IP address
of Telnet clients
NE,
PE
20-9
show version Displays version information for the system NE,
PE
20-10
show bme version Displays version information for VDSL chip,
BME, AFE, and IFE
PE 20-10
show cpu
utilization
Shows CPU utilization parameters NE,
PE
20-11
show memory
status
Shows memory utilization parameters NE,
PE
20-12