SMC Networks SMC7816M, SMC7816VSW 29-80, show lre phys-info

VDSL C OMMANDS
29-80
show lre phys-info
This command displays physical layer information about the VDSL line.
Syntax
show lre phys-info unit/port
•unit - Stack unit. (Range: 1)
•port - Port number. (Range: 1-16)
Command Mode
Privileged Exec
Line Protection (Slow Path) The minimum level of impulse noise protection
for all bearer channels (see lre min-protection,
page29-23).
Downstream/Upstream delay The maximum interleave delay (see lre
interleave-max-delay, page29-25).
Tx total power The maximum aggregate transmit power over all
signal bands for the specified interface.
FE Tx total power The maximum transmit power used at the far
end.
VDSL Estimated Loop Length Estimated length of the VDSL connection; used
to calculate power backoff.
G.Hs Estimated Loop Length Estimated length of the VDSL connection; used
for handshaking.
Current framing mode Only Packet Transfer Mode (PTM) framing is
used for VDSL lines.
Far end capabilities mask The capabilities supported by the attached CPE.
SNR Margin Current signal-to-noise margin
Attenuation Amount of attenuation in signal strength
Avg SNR Margin Average signal-to-noise margin above the SNR.
Avg SNR Average signal-to-noise ratio.
Table 29-10 show lre - display description (Continued)
Field Description