SMC Networks SMC7816M, SMC7816VSW S, C, 23-3, port security

P ORT S ECURITY C OMMANDS
23-3
port security
This command enables or configures port security. Use the no form
without any keywords to disable port security. Use the no form with the
appropriate keyword to restore the default settings for a response to
security violation or for the maximum number of allowed addresses.
Syntax
port security [action {shutdown | trap | trap-and-shutdown}
|max-mac-countaddr ess-count]
no port security [action | max-mac-count]
•action - Response to take when port security is violated.
-shutdown - Disable port only.
-trap - Issue SNMP trap message only.
-trap-and-shutdown - Issue SNMP trap message and disable port.
•max-mac-count
-address-count - The maximum number of MAC addresses that can
be learned on a port. (Range: 0 - 1024, where 0 means disabled)
Default Setting
Status: Disabled
Action: None
Maximum Addresses: 0
Command Mode
Interface Configuration (Ethernet)
Table 23-2 Port Security Commands
Command Function Mode Page
port security Configures a secure port IC 23-3
mac-address-table static Maps a static address to a port in a VLAN GC 30-2
show mac-address-table Displays entries in the bridge-forwarding
database
PE 30-4