SNMP C
OMMANDS
21-18snmp-server user
This command adds a user to an SNMP group, restricting the user to a
specific SNMP Read, Write, or Notify View. Use the no form to remove a
user from an SNMP group.
Syntax
snmp-server user username groupname [remote ip-address] {v1 | v2c | v3
[encrypted] [auth {md5 | sha}
auth-password [priv des56 priv-password]]
no snmp-server user username {v1 | v2c | v3 | remote}
•username - Name of user connecting to the SNMP agent.
(Range:1-32 characters)
•groupname - Name of an SNMP group to which the user is assigned.
(Range:1-32 characters)
•remote - Specifies an SNMP engine on a remote device.
•ip-address - The Internet address of the remote device.
•v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
•encrypted - Accepts the password as encrypted input.
•auth - Uses SNMPv3 with authentication.
•md5 | sha - Uses MD5 or SHA authentication.
•auth-password - Authentication password. Enter as plain text if the
encrypted option is not used. Otherwise, enter an encrypted
password. (A minimum of eight characters is required.)
•priv des56 - Uses SNMPv3 with privacy with DES56 encryption.
•priv-password - Privacy password. Enter as plain text if the encrypted
option is not used. Otherwise, enter an encrypted password.
Default Setting
None
Command Mode
Global Configuration