VDSL C
OMMANDS
29-60thresh-15min-uass
This command sets the threshold for Unavailable Seconds
(UASs)
that can
occur within any given 15 minutes. Use the no form to restore the default
setting.
Syntax
thresh-15min-uass value
value
– Threshold for
Unavailable Seconds
.
(Range: 0-900 seconds; 0 disables the threshold)
Default Setting
10
Command Mode
VDSL Alarm Profile
Command Usage
• An Unavailable Seconds is a one-second interval during which the
VDSL transceiver is powered up but not available (i.e., not in the
Showtime state). A VDSL line will become unavailable at the onset of
10 contiguous Severely Errored Seconds. Once unavailable, the line
should become available at the onset of 10 contiguous seconds with
no SESs.
• This command sets the threshold for the number of severely errored
seconds within any 15 minute collection interval for performance data.
If the number of severely errored seconds in a particular 15-minute
collection interval reaches or exceeds this value, a
vdslPerfUASsThreshNotification notification will be generated.
(Refer to RFC 3728 for information on this notification message.) No
more than one notification will be sent per interval.
Example
The following sets the UASs threshold to 15.
Console(config-alarm-profile)#thresh-15min-uass 15
Console(config-alarm-profile)#