C
LASS
OF
S
ERVICE
C
OMMANDS
33-2priority bits
This command sets the priority bits in the VLAN tag of packets sent by
the CPU. Use the no form to restore the default value.
Syntax
[no] priority bits
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
When priority bits are used in packets sent f rom the CPU, they are
always set to CoS value 0. See Table33-3, “ Default CoS Priority
show priority Shows the priority bits used in packets
sent by the CPU, and the IPv6 Traffic
Class to Class-of-Service priority map
PE 33-4
show queue mode Shows the current queue mode PE 33-5
Port-based Priority Settings
switchport priority
default
Sets a port priority for incoming untagged
frames
IC 33-17
queue bandwidth Assigns round-robin weights to the
priority queues
IC 33-7
queue cos-map Assigns class-of-service values to the
priority queues
IC 33-8
show queue
bandwidth
Shows round-robin weights assigned to
the priority queues
PE 33-9
show queue cos-map Shows the class-of-service map PE 33-10
show interfaces
switchport
Displays the administrative and
operational status of an interface
PE 25-16
Table 33-2 Priority Commands (Layer 2)
Command Function Mode Page