C
LASS
OF
S
ERVICE
C
OMMANDS
33-12
map ip port (Global Configuration)
This command enables IP port mapping (i.e., class of service mapping for
TCP/UDP sockets). Use the no form to disable IP port mapping.
Syntax
[no] map ip port
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The precedence for priority mapping i s IP Port, IP Precedence or IP
DSCP, and default switchport priority.
Example
The following example shows how to enable TCP/UDP port mapping
globally:
map ip port (Interface Configuration)
This command sets IP port priority (i.e., TCP/UDP port priority). Use the
no form to remove a specific setting.
Syntax
map ip port port-number cos cos-value
no map ip port port-number
•port-number - 16-bit TCP/UDP port number. (Range: 0-65535)
•cos-value - Class-of-Service value (Range: 0-7)
Default Setting
None
Console(config)#map ip port
Console(config)#