MATCH
34-5
command to specify the fields within ingress packets that must match
to qualify for this class map.
• Only one match command can be entered per class map.
• The class map uses the Access Control List filtering engine, so you
must also set an ACL mask to enable filtering for the criteria specified
in the match command. See “mask (IP ACL)” on page24-9 and
“mask (MAC ACL)” on page 24-21 for information on configuring an
appropriate ACL mask.
Example
This example creates a class map called “rd_class#1,” and sets it to match
packets marked for DSCP service value 3:
This example creates a class map call “rd_class#2,” and sets it to match
packets marked for IP Precedence service value 5:
This example creates a class map call “rd_class#3,” and sets it to match
packets marked for VLAN 1:
Console(config)#class-map rd_class#1_ match-any
Console(config-cmap)#match ip dscp 3
Console(config-cmap)#
Console(config)#class-map rd_class#2 match-any
Console(config-cmap)#match ip precedence 5
Console(config-cmap)#
Console(config)#class-map rd_class#3 match-any
Console(config-cmap)#match vlan 1
Console(config-cmap)#