SNMP
-
SERVER
GROUP
21-15snmp-server group
This command adds an SNMP group, mapping SNMP users to SNMP
views. Use the no form to remove an SNMP group.
Syntax
snmp-server group groupname {v1 | v2c | v3 {auth | noauth |
priv}} [read readview] [write writeview] [notify notifyview]
no snmp-server group groupname
•groupname - Name of an SNMP group. (Range: 1-32 characters)
•v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
•auth | noauth | priv - This group uses SNMPv3 with
authentication, no authentication, or with authentication and
privacy. See “Simple Network Management Protocol” on page 5-1
for further information about these authentication and encryption
options.
•readview - Defines the view for read access. (1-64 characters)
•writeview - Defines the view for write access. (1-64 characters)
•notifyview - Defines the view for notifications. (1-64 characters)
Default Setting
Default groups: public27 (read only), private28 (read/write)
readview - Every object belonging to the Internet OID space (1.3.6.1).
writeview - Nothing is defined.
notifyview - Nothing is defined.
Command Mode
Global Configuration
Command Usage
• A group sets the access policy for the assigned users.
• When authentication is selected, the MD5 or SHA algorithm is used
as specified in the snmp-server user command.
• When privacy is selected, the DES 56-bit algorithm is used for data
encryption.
27. No view is defined.
28. Maps to the defaultview.