SMC Networks SMC7816M, SMC7816VSW C, S, 9-3

D ISPLAYING C ONNECTION S TATUS
9-3
“Configuring Interface Connections” on page 3-48.) The followin g
capabilities are supported.
- 10half - Supports 10 Mbps half-duplex operation
- 10full - Supports 10 Mbps full-duplex operation
- 100half - Supports 100 Mbps half-duplex operation
- 100full - Supports 100 Mbps full-duplex operation
- 1000full - Supports 1000 Mbps full-duplex operation
- Sym - Transmits and receives pause frames for flow control
- FC - Supports flow control
•Broadcast storm – Shows if broadcast storm control is enabled or
disabled.
•Broadcast storm limit – Shows the broadcast storm threshold. (500 -
262143 packets per second)
•Flow control – Shows if flow control is enabled or disabled.
•LACP – Shows if LACP is enabled or disabled.
•Port security – Shows if port security is enabled or disabled.
•Max MAC count – Shows the maximum number of MAC address that
can be learned by a port. (0 - 1024 addresses)
•Port security action – Shows the response to take when a security
violation is detected. (shutdown, trap, trap-and-shutdown)
•Media type – Shows the forced/preferred port type to use for
combination ports
17-18. (copper forced, SFP forced, SFP preferred
auto)
Current status:
•Link status – Indicates if the link is up or down.
•Port operation status – Provides detailed information on port state.
(Displayed only when the link is up.).
•Operation speed-duplex – Shows the current speed and duplex mode.
•Flow control type – Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or none)