SMC Networks SMC7816M, SMC7816VSW 3/4 P, S, 14-17

L AYER 3/4 P RIORITY S ETTINGS
14-17
Click Priority, IP Port Priority. Enter the port number for a network
application in the IP Port Number box and the new CoS value in the Class
of Service box, and then click Apply.
Figure 14-10 IP Port Priority
CLI – The following example globally enables IP Port Priority service on
the switch, maps HTTP traffic (on port 1) to CoS value 0, and then
displays the IP Port Priority settings.
* Mapping specific values for IP Port Priority is implemented as an interface config-
uration command, but any changes will apply to the all interfaces on the switch.
Console(config)#map ip port 33-12
Console(config)#interface ethernet 1/1 25-2
Console(config-if)#map ip port 80 cos 0 33-12
Console(config-if)#end
Console#show map ip port ethernet 1/5 33-17
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 1 80 0
Console#