This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: THIS WARNING IS APPLICABLE FOR USA AND CANADA.

If used in USA or Canada, use the UL LISTED/CSA CERTIFIED power cord specified below.

DO NOT USE ANY OTHER POWER CORD.

Plug Cap

Parallel blade with ground

 

pin (NEMA 5-15P

 

Configuration)

Cord

Type SJT, three 16 or 18

 

AWG wires

Connector

IEC 320 non-industrial

 

type configuration

Length

Minimum 1.5 m (4 ft. 11

 

in.)

Rating

Minimum 10 A, 125 V

Warning:

Using this unit at a voltage other than 120 V may require the use of a different line cord or attachment plug, or both.

To reduce the risk of fire or electric shock, refer servicing to qualified service personnel.

WARNING: THIS WARNING IS APPLICABLE FOR OTHER COUNTRIES.

1.Use the approved power cord (3- core mains lead)/appliance connector/plug with earthing- contacts that conforms to the safety regulations of each country if applicable.

2.Use the power cord (3-core mains lead)/appliance connector/plug conforming to the proper ratings (voltage, ampere).

If you have questions on the use of the above power cord/appliance connector/plug, please consult a qualified service personnel.

CAUTION

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be placed on the apparatus.

IMPORTANT

The nameplate is located on the bottom.