3DC OUT (DC power supply) connector (XLR, 4-pins, male) Supplies power to an external device through an optional DC connecting cable. Pin 4 is the plus connector and pin 1 the minus.

Note

The BC-M150 cannot charge a battery pack at the same time it supplies DC power to an external device. If you begin using the unit to supply power to an external device while charging a battery pack, the charging stops.

4AC IN (AC power input) connector

Used to connect the charger to an AC outlet through the supplied AC power cord.

5Plug holder receptacle

The supplied plug holder secures the supplied AC power cord so that it will not come loose from the charger.

Plug holder (supplied)

To remove the plug holder receptacle
6Display

The information of the battery packs or the error message appears here.

7DISPLAY button

Press repeatedly to display the battery pack information such as capacity, remaining charging time, a number of cycles of charge and discharge.

8REFRESH MANUAL/AUTO selector

Select to refresh the nickel metal hydride battery packs manually or automatically.

9REFRESH button

Used to refresh the nickel metal hydride battery packs manually.

0CHANNEL button

Used to select the battery pack to display the information or to refresh.

11(EN)