3 Keep pressing the REFRESH button for about a second. When the display is not backlit, press down the button twice to start refreshing. Normal charging starts automatically after the refresh is completed.

4 To refresh more battery packs, repeat steps 2 and 3.

When you check the information of the battery pack being refreshed, “REFRESH” indication lights up; when you check the information of the battery pack waiting to be refreshed, “REFRESH” and “WAIT” indications light up in the display.

To cancel refreshing the battery pack

When the REFRESH MANUAL/ AUTO selector is set to “AUTO,” set it to “MANUAL,” then remove the battery pack from the battery charger, and then reattach it. When you reattach the battery pack, normal charging starts. While refreshing the battery pack manually, you can also keep pressing the REFRESH button for about a second to cancel refreshing.

Notes

•The time to take for refreshing depends on the remaining capacity of the battery pack. For shorter refreshing time, it is recommended to discharge the battery pack completely before refreshing it.

•The charger detects the output voltage of the attached battery pack. If the voltage of the battery pack is above certain level, the battery pack is assumed that refreshing is unnecessary. In this case, refreshing does not take place even if the REFRESH button is pressed and normal charging starts, instead.

•You cannot refresh the lithium ion battery packs.

17(EN)