Troubleshooting

In the recording and playback modes

Symptom

Cause and/or Corrective Actions

The power does not turn on.

• The battery pack is not installed, or is dead or nearly dead.

 

mInstall a charged battery pack. (p. 12, 13)

 

• The AC power adaptor is not connected to the mains.

 

mConnect the AC power adaptor to the mains. (p. 17)

The end search function does not

• The tape was ejected after recording.

work.

• You have not recorded on the new cassette yet.

The battery pack is quickly

• The operating temperature is too low.

discharged.

• The battery pack is not fully charged.

 

mCharge the battery pack again. (p. 13)

 

• The battery pack is completely dead, and cannot be recharged.

 

mReplace with a new battery pack. (p. 12)

The battery remaining indicator does

• You have used the battery pack in an extremely hot or cold

not indicate the correct time.

environment for a long time.

•The battery pack is completely dead, and cannot be recharged. mReplace with a new battery pack. (p. 12)

•The battery is dead.

mUse a charged battery pack. (p. 12, 13)

The cassette cannot be removed from

• The power source is disconnected.

the holder.

mConnect it firmly. (p. 12, 17)

 

• The battery is dead.

 

mUse a charged battery pack or the AC power adaptor.

 

(p. 12, 13)

The {and 6indicators flash and no • Moisture condensation has occurred.

functions except for cassette ejection

mRemove the cassette and leave your camcorder for at least 1

work.

hour to acclimatize. (p. 100)

(continued on the following page)

χˆËя￿ËÌÙÓ ДÓÔÓÎÌËÚÂθ̇я Information Additional

89