Overview 1 Chapter
6Index indicator
Displays INDEX MARK when an index has been marked.
7Caution indicator Displays a caution.
For details on cautions, see “Alarm Messages” on page 97 (GB).
8PAL
back a PAL formatted tape.
9DVCAM/DV indicator
In the EE or recording mode, displays the recording format selected in REC MODE on the VTR SET menu. During playback, displays the recording format of the picture.
0Audio mode indicator
In the EE or recording mode, displays the audio mode selected in AUDIO MODE on the AUDIO SET menu. During playback or audio dubbing, displays the audio mode recorded on the tape. When you input a signal to the DV jack, displays the audio mode of that signal.
qa Input signal indicator
Displays the INPUT SELECT selector setting.
qs NS (Non standard) audio mode indicator
This item is shown when a tape recorded in the unlock audio mode is played back or when an unlock mode signal has been input to the DV jack. In EE mode, when REC MODE in the VTR SET menu is set to DV SP, this item is always shown.
For details on the unlock mode, see “Compatibility of DVCAM and DV Format” on page 101 (GB).
Audio screen
To display the audio screen, set the DISPLAY SELECT selector to AUDIO. You can confirm or adjust the audio levels and confirm the audio input signal settings on this screen.
| · · · | · | · | · dB |
| |||
| 20 | 10 | 0 |
|
| |||
CH1 |
|
| ···· | · | 1 | |||
| ||||||||
|
|
|
|
|
|
|
| |
CH2 |
|
| ····· | · | 2 | |||
| ||||||||
|
|
|
|
|
|
|
| |
CH3 |
| |||||||
CH4 | ········· | · |
| |||||
|
|
|
|
|
|
|
| 3 |
|
|
|
|
|
|
|
|
|
1Audio levels
Displays the audio levels for each channel independently. When the audio mode is FS32K, the audio levels of four channels, channel 1 to 4, are displayed. When the audio mode is FS48K, the audio levels of channel 1 and 2 are displayed.
The unit detects the audio mode as follows.
In the playback mode: Detects the audio mode recorded on the tape.
In the recording/EE mode: Detects the selected audio mode in AUDIO MODE on the AUDIO SET menu.
When the INPUT SELECT selector is set to DV and a DV signal is being input: Detects the audio mode of the signals being input. (The setting of AUDIO MODE on the AUDIO SET menu becomes invalid.)
In the EE, recording, or audio dubbing (only the audio dubbing channel) modes, if the input levels exceed
0 dB, the portions of the meters that exceed 0 dB turn to red. During playback, while DV signals are input or the AUDIO INPUT switch is set to AUTO, those portions of the levels meters do not turn to red.
2Audio dubbing symbol
This symbol appears associated with a channel on which you can dub sounds.
Appears when:
•a tape is being transported and pictures are displayed on the LCD monitor or on an external monitor.
•the unit is in the stop mode, a signal other than DV is selected, and you press the AUDIO DUB button.
28 (GB) | Chapter 1 Overview |