Icon/Menu

Submenu

Setting

(page)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V VIDEO SET PB LEVEL

Adjusts the output video signal levels. (This is available only when the mode is playback,

 

(page 68 (GB)) playback pause, slow playback, cue, or review.)

 

 

 

SETUP: Switches the luminance signal setup level (0% or 7.5%). (This item is only for the

 

 

 

DSR-45. The setup level for the DSR-45P is fixed to 0%.)

 

 

 

Y LEVEL: Adjusts the Y signal level of the component signals. (If you change this, the Y

 

 

 

signal level of the composite video and S VIDEO will also be changed.)

 

 

 

R-Y LEVEL: Adjusts the R-Y signal level of the component signals. (If you change this,

 

 

 

the chrominance level of the composite video and S VIDEO will also be changed.)

 

 

 

B-Y LEVEL: Adjusts the B-Y signal level of the component signals. (If you change this,

 

 

 

the chrominance level of the composite video and S VIDEO will also be changed.)

 

 

 

CHROMA: Adjusts the chrominance level in the composite signals.

 

 

 

 

 

 

 

 

 

Notes

 

 

 

 

• You can adjust the video levels only while playing the tape.

 

 

• Adjust the video levels by looking at the bars (except SETUP). (The triangles under the

 

 

 

bars are displayed in green when the settings are set to the factory preset values.)

 

 

• The SETUP default is 0%. Other defaults are their center values.

 

 

• The output video signals can be adjusted only for VIDEO OUT, COMPONENT OUT, or S

 

 

 

VIDEO OUT.

 

 

• Set SETUP to 7.5% only if the tape has been recorded at 0% and you want to play back

 

 

 

the tape at 7.5%. If you play back a 7.5% tape at the 7.5% setting, the tape will not be

 

 

 

played at the proper brightness. If you set SETUP at 0% and if you play back a 7.5% tape,

 

 

 

the tape will be played at 7.5%. (You cannot play the tape at 0%.)

 

 

 

 

 

 

 

EXT SYNC

Switches the externally synchronized playback setting.

 

 

 

OFF

: No external synchronization

 

 

 

ON:

External synchronization

 

 

 

 

 

 

 

 

Notes

 

 

 

 

• It may take three or more seconds until a stable image is output in the externally-

 

 

 

synchronized playback mode.

 

 

• In the externally-synchronized playback mode, jitter may appear on the MONITOR VIDEO

 

 

 

output or on the LCD monitor image. Use the VIDEO OUT connector to output an

 

 

 

externally-synchronized image. Set this item to OFF when you use the MONITOR VIDEO

 

 

 

output.

 

 

 

 

 

 

 

H PHASE

Roughly adjusts the sync phase in the externally-synchronized playback mode.

 

(page 66 (GB)) Press the J/j buttons to move the bar and press the EXEC button to select. (The triangle

 

 

under the bar is displayed in green when the setting is set to the factory preset value.)

Notes

•You can adjust this item only in the externally-synchronized playback mode.

•If you change this item, the H PHASE F value will be set to the factory preset value.

H PHASE F Finely adjusts the sync phase in the externally-synchronized playback mode.

(page 66 (GB)) Press the J/j buttons to move the bar and press the EXEC button to select. (The triangle under the bar is displayed in green when the setting is set to the factory preset value.)

Notes

•You can adjust this item only in the externally-synchronized playback mode.

•If you change the H PHASE value, this item is set to the factory preset value.

(Continued)

Menus Through Setting and Adjusting 6 Chapter

Chapter 6 Adjusting and Setting Through Menus 87 (GB)