5 Set EXT SYNC on the VIDEO SET menu to ON, then play back a tape on this unit.
6 Press the A channel button on the vectorscope.
The vectorscope displays the sync phase and subcarrier phase (composite signals only) of the signal from this unit.
7 Adjust the SYNC control using H PHASE on the VIDEO SET menu for rough adjustment, then adjust H PHASE F for fine adjustment, so that the output from this unit on channel (A) is in correct phase alignment with the black burst signal on channel (B).
8 Adjust the SC control using SC PHASE on the VIDEO SET menu for rough adjustment, then adjust SC PHASE F for fine adjustment, so that the output from this unit on channel (A) is in correct phase alignment with the black burst signal on channel (B).
(for NTSC)
This indicator moves as you adjust the H PHASE or H PHASE F menu.
This indicator moves as you adjust the SC PHASE or SC PHASE F menu.
Adjust the sync and subcarrier phase of the output signal from this unit.
(for PAL) |
|
| ||
This indicator |
|
|
| This indicator |
moves as you |
| |||
| ||||
adjust the H |
| moves as you | ||
PHASE or H |
| adjust the SC | ||
PHASE F menu. |
| PHASE or SC | ||
|
|
|
| PHASE F menu. |
Adjust the sync and subcarrier phase of the output signal from this unit.
Note
When component signals are used, the subcarrier phase indicator does not appear.
Signals Video the Adjusting and Code Time the Setting 4 Chapter
Chapter 4 Setting the Time Code and Adjusting the Video Signals 67 (GB)