Dubbing Audio and Duplication 5 Chapter
3 While holding the DUP button down, press the PLAY button on this unit.
This unit and the player will automatically rewind the tape to the beginning. This unit enters the
If you press the PAUSE and PLAY buttons while holding the DUP button down in step 3 This unit and the player will automatically rewind the tape to the beginning. This unit enters the duplicate- standby mode. The player enters the playback pause mode. This unit does not start duplication until you press the PAUSE button.
To stop duplication
Press the STOP button on this unit.
Notes
•You cannot pause during a duplicate process.
•Before you start duplication, make sure that the player has finished loading the cassette.
•The duplication starts after the i.LINK communication is established so that the first part of the source tape is dropped on the copied tape.
•Set auto repeat to OFF when the player has an auto repeat function and set auto rewind to ON when the player has an auto rewind function.
•If the player has a still timer function, set the still timer to the longest time possible to ensure enough time for rewinding the tape to the beginning.
•If you have selected AUTOq
duplicate mode, the cassette memory will be duplicated after the tape has been duplicated. While the cassette memory is being duplicated, an indicator showing the progress of the duplication appears on the LCD monitor and on the MONITOR VIDEO output. Duplicating the cassette memory takes up to a few minutes depending on the amount of data.
In the following cases, duplication of the cassette memory will be cancelled and the duplicate operation will be completed without duplicating the cassette memory.
If, while the cassette memory is being duplicated;
–you press the STOP button.
–you turn off the power of this unit or of the player.
–you eject the cassette.
–you disconnect the DV cable.
If the duplication of the cassette memory stops for some reason, the cassette memory on the duplicated tape will be completely erased.
•When both the recorder and the player are
•If you operate the player while duplicating and the PLAYER UNCONTROLLABLE warning message appears and duplication is stopped, press the STOP button on this unit, then repeat the procedure from step 3.
•Normally, the player and recorder rewind their tapes automatically after duplication. However, depending on the specifications, some players do not.
MANUALq duplicate mode
1 Connect this unit and the player using an i.LINK cable (DV cable, not supplied). After turning on power of this unit and the player, set the INPUT SELECT selector on this unit to DV.
2 Locate the points where you want to start playback and recording.
3 Press the STOP button on this unit to stop the tape transport operation.
4 While holding the DUP button down, press the PLAY button on this unit.
This unit enters the
To adjust the point where duplication starts In step 4, while holding the DUP button down, press the PAUSE button and the PLAY button. This unit will not start duplication until you press the PAUSE button again. After confirming that the PLAYER display has changed to READY (flashing) on the LCD monitor, adjust the duplication start point using the player, then press the PAUSE button on this unit to start duplication.
To stop duplication
Press the STOP button on this unit.
70 (GB) | Chapter 5 Duplication and Audio Dubbing |