System Editing an in Player a as Unit the Using 3 Chapter

Adjusting Edit Timing

For details, refer to the instruction manuals of the editing controller you use.

Using this unit as a player with the RM- 450/450CE

1 Set the SYNCHRO selector to ON.

2 Set item number 3 of the SYSTEM PRESET right switch to OFF (it is set to OFF at factory).

Setting this to OFF adjusts the synchronization of the recorder.

3 Execute the LEARN function.

Using this unit as player 1 with the PVE- 500

When using this unit as player 2, the relevant menu item is indicated in ( ).

1 Set Sync Edt of SEtUP-10 to OFF in the SETUP menu.

2 Set P1 dELAY (P2 dELAY) of SEtUP-13 (SEtUP- 14) to LEArn in the SETUP menu.

3 Set rEC Sync of SEtUP-15 to On in the SETUP menu.

4 Set P1 Sync (P2 Sync) of SEtUP-16 (SEtUP-17) to OFF in the SETUP menu.

5 Execute the LEARN function.

Using this unit as a player 1 with the FXE- 120/120P

•When using this unit as player 2, the relevant menu item is indicated in ( ).

•When using an FXE-100/100P that has been upgraded with an FXE-KIT1, the relevant menu item is indicated in [ ].

1 Display item 104 [301] SYNC GRADE in the SETUP menu, and set PLAYER1 (PLAYER2) to

PREROLL & PLAY.

2 Display item 301 (302) [401 as player 1, 402 as player 2] DEVICE TYPE PLAYER1 (DEVICE TYPE PLAYER2) in the SETUP menu, and set the VCR device constants.

For details on device constants, see page 47 (GB).

3 Execute the LEARN function.

If the edit timing is out of adjustment, follow the instruction given in “Adjusting the IN point” below.

Adjusting the IN point

If the actual edited point does not accurately coincide with the preset editing point, perform a fine adjustment of the edit timing using the SETUP menu of the editing controller. This improves the editing accuracy.

1 Display item 301 (302) [401 as player 1, 402 as player 2] DEVICE TYPE PLAYER1 (DEVICE TYPE PLAYER2) in the SETUP menu, and change it from DISABLE to ENABLE.

2 Repeat the editing process several times and check the shift of the editing point; that is, count the number of frames to be adjusted.

Note

The editing results may differ between the DISABLE and ENABLE settings of SETUP menu item 301 (302) [401 as player 1, 402 as player 2]. Be sure to check the editing results after changing the setting to ENABLE.

56 (GB)

Chapter 3 Using the Unit as a Player in an Editing System