Recording and Playback 2 Chapter
Recording
To video equipment without a DV jack
You can connect this unit to video equipment without a DV jack. Use this unit as a recorder as follows.
Monitor | Monitor | Phono jack cable |
|
| |
|
| (not supplied) |
| Audio input |
| Video input |
Player | |
| (rear panel) |
| Phono |
| jack cable |
| (not |
| supplied) |
| |
| Video output |
| Audio output |
| Component output |
75 Ω coaxial cable (not supplied)
Audio cable (phono jack) (not supplied)
Video cable (3BNC y 3BNC) (not supplied)
: Signal flow
Connect one of the following as a video cable: video cable (3BNC y 3BNC),
Use a conversion cable for the audio connection, depending on types of audio output connectors on the player (see page on 23 (GB)).
Notes
•During recording, analog input signals can be output simultaneously from the DV jack for backup. Set DV
EE OUT on the VTR SET menu to ON.
For details on the VTR SET menu, see “VTR SET menu” on page 90 (GB).
•If you connect the output connectors of this unit to the input connectors of the player, a humming noise may be generated or the image may be distorted. If these phenomena occur, set the INPUT SELECT selector to a position where a signal is not currently being input, or disconnect the cables.
42 (GB) | Chapter 2 Playback and Recording |