OPERATION PANEL (GENERAL)
Paper Tray Settings
Paper tray and paper type settings are explained in this section. Select the [Paper Tray Settings] key to configure the settings.
Tray Settings
These settings specify the paper type, paper size, and functions allowed for each paper tray. When the [Tray Settings] key is selected, a list appears showing the trays and the current settings.
BACK OK
Settings of each tray
Select the [Change] key in the above screen to change the settings.
The following settings can be configured.
Item | Description | |
|
| |
| Select the type of paper that is loaded in the tray. | |
Type | The paper types that can be selected vary by paper tray. For more information, see | |
"Tray Settings" (page | ||
| ||
| To store a new paper type, see "Paper Type Registration" (page | |
|
| |
| Select the paper size from the list. The paper sizes that can be selected vary by tray. | |
| The sizes that can be selected may also be restricted by the paper type selected | |
Size | above. For more information, see "Tray Settings" (page | |
If the desired size does not appear in the list, select [Custom Size] and directly enter | ||
| ||
| the size (only for the bypass tray). For more information, see "Tray Settings" (page | |
| ||
|
| |
Approving Feeding | Select whether or not printing is allowed using the specified tray. | |
|
|
• If the paper size specified here is different from the size of paper that is loaded in a tray, a problem or misfeed may result when printing.
To change the paper size in a tray, see "1. BEFORE USING THE MACHINE".
•Paper properties such as "Fixed Paper Side" are automatically set when the paper type is selected. The paper tray properties cannot be changed in this screen.
•If "Disabling of Tray Settings" (page