WEB PAGE (ADMINISTRATOR)
Interface Settings
These settings are used to control and monitor data transmitted to the USB port or network port of the machine. Select [System Settings] - [Printer Settings] - [Interface Settings] in the menu bar, and configure the settings.
Hexadecimal Dump Mode
This function is used to print the print data from a computer in hexadecimal format together with the corresponding ASCII text. This allows you to check whether or not print data from the computer is being transmitted to the machine correctly.
Example of a hexadecimal dump
I/O Timeout
The I/O timeout can be set to any number of seconds from 1 to 999.
The I/O timeout function temporarily breaks the connection if the set duration of time elapses without any data being received by the port. After the connection is broken, the port is set to auto selection or the next print job is begun.
Enable USB Port
This is used to enable printing from the USB port.
Enable Network Port
This is used to enable printing from the network port.
Network Port Emulation Switching
This setting is used to select the emulated printer language when the machine is connected by a network port.
The settings are shown below.
•Auto
•PostScript
•PCL
• The settings are the same as those of "USB Port Emulation Switching".
•Unless printer errors occur frequently, it is recommended that you use the factory default setting "Auto".
Port Switching Method
This setting is used to select when port switching takes place.
Switch at End of Job
The port changes to auto selection when printing ends.
Switch after I/O Timeout
When the time set in "I/O Timeout" elapses, the port changes to auto selection.
USB Port Emulation Switching
If the machine is connected using the USB port, select the emulated printer language.
The settings are shown below.
•Auto
•PostScript
•PCL
• The settings are the same as those of "Network Port Emulation Switching".
•Unless printer errors occur frequently, it is recommended that you use the factory default setting "Auto".
The following two print ports are available on the machine:
•USB port
•Network port