Grasp the developer cartridge lock and replace it on the machine.
8
Hold the developer cartridge with one hand and slowly remove the seal with the other hand.
Slowly pull the seal straight and horizontally out.
9
If excessive force is used or the seal is pulled out diagonally, it may tear.
There is a mark (red belt) on the end of the seal. After removing the seal, be sure to verify that the mark (red belt) is on the end of the seal.
If the seal has been cut on the developer cartridge, the cartridge cannot be used. Replace with a new developer cartridge.
Close the main charger cover and rotate the lock levers in the direction of the arrows to lock the cover.
When the lock levers are vertical, the cover is locked.
10
| (1) | Install the toner collection container. |
| ||
|
| |
11 | (2) | |
|
|