CLEANING THE PT CHARGER
If black or white lines still remain after the main charger have been cleaned, use the PT charger cleaner to clean the PT charger.
1
2
Press the [POWER] key (
) on the operation panel to turn off the panel power, and then switch the main power switch to the off position.
Open the front cover and remove the toner collection container.
Do not point the holes down as used toner will spill out.
3
Clean the PT charger.
(1) Slowly pull the PT charger cleaner out until you feel a slight resistance.
(2) Slowly push the PT charger cleaner back in.
(3) Repeat the above (1) to (2) three times.
| (1) | Install the toner collection container. |
| ||
| (2) | |
4 | ||
|
|