Sony PCG-C1VE manual Getting Help

Check that [Yes] is selected and then press the Enter key.

Check the floppy disk drive to see if a non-bootable diskette is in the drive.

If a non-bootable diskette is in the drive, eject it and press any key on your keyboard. Windows then starts normally.

If Windows still does not start, follow the procedure below to initialize the BIOS. If the floppy disk drive is empty, follow the steps below to initialize the BIOS: Remove any peripheral devices connected to the computer,

Turn the computer off and then turn it on again,

Getting Help

Troubleshooting

Sony Notebook Computer User Guide

n N 70

When I turn on my computer, the message Operating system not found appears and Windows does not start.

￿

1

2

3 Turn on the computer and press the F2 key when the Sony logo appears. The BIOS setup menu screen appears.

4 Press the arrow keys to select the Exit menu.

5 Press the arrow keys to select Get Default Values and then press the Enter key. The message Load default configuration now? appears.

6

7 Press the arrow keys to select Exit (Save Changes) and then press Enter. The message Save configuration changes and exit now? appears.

8 Check that [Yes] is selected, then press the Enter key. The computer will restart.

When I turn on my computer, the message “ No system disk or disk error. Replace and press any key when ready” appears and the computer does not start.

Remove the diskette from the floppy disk drive by pressing the Eject button and then press any key.