Option 1
The following instructions illustrate how to remove the memory module located underneath the bottom panel of the computer.
To remove a memory module
1.Turn off the computer and all attached devices.
2.Disconnect the power cord, all cables, and remove the battery if it is installed. See Removing a battery.
3.Wait for the computer to cool down.
The interior of the computer becomes extremely hot during operation. Wait at least one hour for the computer to cool down before you remove the screws.
4.Turn the computer over and use a screwdriver to loosen and remove the screw(s) on the memory bay.
To avoid damaging the computer, do not remove or loosen any other screws.
Removing the Bottom Screw(s)
5.Remove the memory bay cover carefully.
6.Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity.
Avoid touching any part of the motherboard or other components inside the computer.
7.Remove the memory module by pulling out the tabs (see arrows No. 1), and pulling out the module in the direction of arrow No. 2. See To install a memory module for more information.
Removing a Memory Module
To install a memory module
1.Remove the new memory module from its packaging, and install the memory module by sliding it into the open slot at a
Installing a New Memory Module
Page 210
