![](/images/new-backgrounds/1260927/26092719x1.webp)
I N T R O D U C T I O N | For Machines Mfg. Since 3/11 |
Tailstock Controls
A | B | C | D |
|
|
| E |
| H |
| F |
|
| G |
Figure 9. Tailstock controls.
A.Tailstock Handwheel: Moves the quill toward or away from the spindle.
B.Graduated Scale: Indicates quill movement in increments of 0.001". One full rotation of handwheel is 0.100".
C.Tailstock Lock Lever: Secures the tailstock in place along the bedway.
D.Quill Lock Lever: Locks the quill in position.
E.Quill: Holds centers or tooling with an MT#4 taper. Moves toward and away from the spindle.
F.Tailstock Offset Screw: Adjusts and secures the tailstock offset (1 of 2).
G.Gib Adjustment Screw: Adjusts the tailstock gib that controls
H.Offset Scale: Indicates the distance of tailstock offset from the spindle centerline. The scale increments are arbitrary.
Foot Brake
This lathe is equipped with a foot brake (see Figure 10) to quickly stop the spindle instead of allowing it to coast to a stop on its own. Pushing the foot brake while the spindle is ON also cuts power to the motor.
After the foot brake is used, the spindle ON/ OFF lever must be returned to the OFF (middle) position to reset the spindle switches, which will enable spindle rotation.
Spindle
ON/OFF Lever
Foot Brake