Star Micronics HL 80825321 user manual Automatic fanfold feeding, Manual sheet feeding, 115

Paper guide

Guide-papier

Papierführung

Guida della carta

Release lever

Levier de dégagement

Papierwahlschalter

Leva di rilascio

Cut-sheet

Feuilles séparées

Einzelblatt

Carta in fogli

Fanfold Papier continu Endlospapier

Carta in modulo continuo

Automatic fanfold feeding

❏See “Loading paper” on page 15 for details on using fanfold paper.

Manual sheet feeding

You can use the following procedure to manually feed single sheets of paper into the printer.

❏ Make sure that there is no fanfold paper in the

printer. If there is, use the procedure under

“Parking fanfold paper” on page 21 to park the

fanfold paper and prepare for manual sheet

feeding.

❏ Set the release lever to the cut-sheet position.

❏ Reposition the paper guide so it is standing up

and adjust the guides to match the width of the

paper.

❏ Insert a sheet of paper into the paper guide, with

the side you want to print on facing the back of

the printer. Gently push the paper down into the

printer until you feel it stop.

❏ Pull the bail lever toward the front of the printer.

This will feed the paper to the starting position.

Bail lever

LOAD

Levier du presse-papier

Freigabehebel

Leva libera-carta

❏ After the paper is fully fed (indicated by the

printer’s beeping), return the bail lever back to its

original position toward the back of the printer.

Important!

Never return the bail lever back to its original position until the paper is fully fed. The printer will beep to let you know when you can return the bail lever to its original position.

❏If you want to move the paper to another position, use the micro feed function described under “Micro feed” on page 33.

❏Start the printing operation from your software application.

115