Star Micronics HL 80825321 user manual Removing the ribbon cassette, Installing the paper guide

Paper guide Guide-papier Papierführung

Guida della carta

Removing the ribbon cassette

Use the following procedure to remove the ribbon cassette from the printer when you want to replace it with a new one.

❏Make sure that the printer is unplugged from its power outlet.

Caution!

Never move the print head while the printer is turned on. Doing so can damage the printer. If you have just finished printing, let the print head cool for a few minutes before you touch it.

❏Open the front cover of the printer.

❏Pressing the release tab on the ribbon cassette (the one labeled “TO REMOVE”), lift up the front part (the part nearest the print head) of the ribbon cassette.

❏Once it is free, carefully remove the cassette from the holder.

❏Use the procedure under “Installing the ribbon cassette” on page 7 to install a new cassette.

Installing the paper guide

❏Insert the two tabs on the bottom of the paper guide into the holes provided on the rear cover of the printer.

❏To remove the paper guide from the printer, simply pull the tabs out of the holes.

Note:

Lay the paper guide down flat when using fanfold paper, and stand it up when using cut-sheet paper.

11