Star Micronics HL 80825321 user manual

Volet de tracteur

Stachelwalzenhalter

Coperchio trattore

Clamp lever

Levier de verrouillage

Klemmhebel

Leva di blocco

❏Open the covers of both tractors and insert the paper so the tractor pins fit into the holes of the paper.

❏Close the tractor covers and make final adjustments to the paper position by moving the tractors. The paper should lie flat with no buckling or bulging (tractors too close) or stretching or elongating the holes (tractors too far apart). After making these adjustments, be sure that you re-lock the tractors by pulling the gray levers into the locked position.

❏Close the rear cover and press down gently on it until it locks into place with a click.

Note:

If you removed the rear cover, first insert its two tabs into the holes provided in the back of the printer and then swing it closed.

17