Chapter1.frame Black #99
Installing the paper support
❏Insert the ends of the paper support into the
slots on the printer as shown in the
following illustration.
Connecting to your computer
The computer sends data to the printer through a
cable. This printer does not come with a cable, so you
must purchase one of your own. You will probably
want to use a standard parallel cable for connection,
but note that you can also use an optional Serial-To-
Parallel Interface Converter (SPC-8K).
For an IBM-compatible personal computer:
✓Use a standard 36-pin Centronics parallel cable.
✓The parallel cable should be no longer than six
feet (two meters). Longer cables can result in
poor transfer of information.
Important!
The following instructions apply to the Centronics
parallel cable that is used with an IBM-compatible
personal computer. Note that they do not apply to all
types of computers and cables. If you are unsure
about what type of cable you should use to connect
with your computer, consult with your dealer.
Important!
Make sure that the printer is unplugged from the AC
outlet and that the computer is switched off before
connecting them.