For example:

# clia sendcmd 96 2e 81 00 00 2a 01 <

----- Setting the boot page to 1

Pigeon Point Shelf Manager Command Line Interpreter

Completion code: 0x0

(0)

<-----

successful completion code

Response data: 00 00

2A

<-----

no data returned

 

 

 

 

3.To boot the blade server from the Shelf Manager, type:

#clia activate board n

Note – Once the blade server is booted, reset the blade server to use the primary BIOS image (page 0).

4.10Perform a Live Firmware Upgrade

To upgrade the BIOS firmware while retaining the current BIOS image, follow these steps:

1.Switch the BIOS image from page 0 to page 1.

See Section 4.9, “Use the Secondary BIOS Image” on page 4-12.

2.Use the Solaris BIOS Update Utility to upgrade the page 1 BIOS image. See Section 4.7, “Updating the BIOS” on page 4-12.

3.Reboot the system into the updated page 1 BIOS.

See Section 2.3.12, “Resetting the Sun Netra CP3220 Blade Server” on page 2-36.

Chapter 4 Configuring and Using BIOS Firmware 4-13

Page 91
Image 91
Sun Microsystems CP3220 manual Perform a Live Firmware Upgrade, For example