Sun Microsystems CP3220 manual Hardware Installation and Service

2. Hardware Installation and Service			2–1
2.1	Safety and Tool Requirements		2–2
	2.1.1	Equipment and Operator Safety 2–2
	2.1.2	Materials and Tools Required		2–3
2.2	Installing the Blade Server 2–3
	2.2.1	Preparing for the Installation		2–3

2.2.1.1Check Power, Thermal, Environmental, and Space Requirements 2–4

2.2.1.2Local Network IP Addresses and Host Names Worksheet 2–5

2.2.1.3	Installation Procedure Summary	2–6
2.2.2 Configuring the Hardware 2–6
2.2.2.1	Verify Chassis Fan Tray Upgrade	2–7
2.2.2.2	Installing Optional Components	2–7

2.2.2.3Configuring the Advanced Rear Transition Module Hardware 2–8

2.2.3Installing the Sun Netra CP3220 Blade Server in an ATCA Shelf 2–8

2.2.3.1	Installing an Advanced Rear Transition Module 2–8
▼ To Install an ARTM 10
2.2.3.2	Installing the Blade Server Into the Shelf 2–12

2.2.4 Connecting External I/O Cables 2–13

2.2.4.1Connecting Cables to a System Console Running the Solaris OS 2–13

2.2.4.2Connecting Cables to the System Console Not Running

	the Solaris OS 2–15
2.2.4.3	Netinstall Boot Device Map 2–15

2.3Service Procedures 2–17

2.3.1	Hot-Swapping the Sun Netra CP3220 Blade Server	2–17
2.3.2	Powering Off the Sun Netra CP3220 Blade Server	2–17
2.3.3	Removing the Sun Netra CP3220 Blade Server 2–18

iv Sun Netra CP3220 Blade Server User’s Guide • January 2010