Sun Microsystems X6270 manual Install Server Module Optional Components

Figure Legend Server Module Optional Componets

3Compact Flash module

The Compact Flash module is shown in FIGURE 2-1under the REM.

4a DIMMs

The DIMMs in FIGURE 2-1are shown populated in DIMM slots 2, 5, 8 for each CPU.

Note - Processor chip contains memory controller. Do not attempt to populate DIMMs sockets next to unpopulated (empty) CPU sockets.

4b DIMM filler panels

DIMM filler panels are shown populated in DIMM slots 0, 1, 3, 4, 6 and 7.

The DIMM filler panels should remain in unpopulated DIMM slots until the DIMM filler panel can be replaced with a DIMM. Otherwise, you might experience a reduction in system performance.

5CPU heatsinks (up to two CPUs can be installed)

The minimum CPU configuration shipped includes one CPU with a heatsink. An air baffle is shipped to cover the empty CPU socket (not shown in FIGURE 2-1). Additional CPUs can be ordered.

In the example shown in FIGURE 2-1, the CPUs are installed under the two heatsinks

6Storage drives (hard disk drives or solid state drives) (up to 4 drives may be populated)

Note – Server module options and their part numbers are subject to change over time. For the most up-to-date list of components for the Sun Blade X6270 Server Module, click on the X6270 Server Module product page at:

http://sunsolve.sun.com/handbook_pub/Systems/

Chapter 2 Install Server Module Optional Components 9