Sun Microsystems manual 2Sun Blade X6270 Server Module Front Panel LEDs

Note – The server SP can take several minutes to boot. As the server SP is booting, the OK/Power LED illuminates a slow blink (0.5 second on, 0.5 second off). After the server SP boots, the OK/Power LED illuminates a standby blink (0.1 second on,

2.9seconds off). The standby blink state indicates that the server SP is active and the server module host (BIOS) is powered off.

FIGURE 3-2Sun Blade X6270 Server Module Front Panel LEDs

1

2

3

4

5

6

7

8

9

10

Figure Legend Server Module LEDs

1Server Module Locate LED – White

2Server Module Ready to Remove LED – Blue

3Server Module Service Action Required LED – Amber

4Server Module OK/Power LED – Green (blinking or solid state)

5Server Module Power button/reset

6Non-Maskable Interrupt (NMI) button (Service only)

7Universal Connector Port (UCP), used for dongle cable

Chapter 3 Installing and Powering On the Sun Blade X6270 Server Module 37