Sun Microsystems X6270 manual Attach Devices to Server Using the 3-Cable Dongle

Note – Direct management of an individual server module is through the embedded server module SP, Sun Integrated Lights Out Manager (ILOM). Access to the server module SP is made through the serial port or the chassis monitoring module (CMM) management network. For more information about server-level management or chassis-level management in ILOM, see the system chassis documentation or the Sun Integrated Lights Out Manager 2.0 User’s Guide or Sun Integrated Lights Out Manager 3.0 Documentation Collection.

Caution – You should use the dongle cable for configuration and service purposes. Disconnect the dongle cable from the server module after the configuration or service operation is complete to avoid damaging the cable.

▼Attach Devices to Server Using the 3-Cable Dongle

1.Insert the dongle cable into the universal connector port (UCP) on the server module front panel.

See FIGURE 3-3.

2.Attach the connectors on the dongle cable to the appropriate devices. See “Dongle Cable Connectors” on page 43.

42 Sun Blade X6270 Server Module Installation Guide • December 2009