Interface Configuration and Interpretation

To summarize:

ƒAll cards can be selected and configured using the configuration screen (use the Config button).

ƒThe results and measurements of the installed card can be observed using the Input Card button.

ƒCIP card configuration, results and measurements can all be done using the Input Card button.

The Input Card button on the button bar will be inactive (that is, dimmed) if an interface card is fitted, but not selected in the Configuration screen. The button will not be present if no interface card is installed. Also, when active, the button will only display red and green states; this indicates the interface card stream lock status (also displayed on the configuration screen).

In the Input Card screen, the settings area (right-hand side) contains two sub-areas. The Readings area displays values received from the card itself. A yellow background to the reading indicates that the reading has not been recently updated. The Controls area contains user controls; values entered here will be applied to the card and affect its performance. These controls correspond exactly with those on the corresponding configuration screen.

3-108

MTM400 MPEG Transport Stream Monitor User Manual