Interface Configuration and Interpretation

QAM (Annex A and Annex C)

The QAM Annex A and Annex C interfaces have common settings. The Annex A interface appears as shown in Figure 3-40:

Configuration - QAM (Annex A and Annex C)

Figure 3-40: Interface configuration - QAM (Annex A and Annex C)

Configurations The QAM Settings dialog provides an option to recall a number of settings configuration files. The configuration files are created and stored in the MTM400. To select a configuration file, highlight the required name in the list.

Rx Frequency (MHz)

Receive frequency.

Enter the required value and select Set.

Symbol Rate (MS/s)

Symbol rate value.

Enter the required value and select Set.

3-114

MTM400 MPEG Transport Stream Monitor User Manual